MWO-9-2350-314-20-10

MWO-9-2350-314-20-10 - Page 7 of 13

MWO 9-2350-314-20-10

(1)

Slide modified electrical shield (33) upward, into place behind mechanical drive guard (16).

(2)

Fasten electrical shield (33), spacer (14) and spacer (15) to the cab with four screws (11), four new lock

washers (12), and four flat washers (13).

(3)

Reconnect three electrical leads (21, 22, 23), to brush block #6 (24) with screw (20), two flat washers (19),

new lock washer (18), and nut (17).

Reconnect three electrical leads (29, 30, 31), to brush block #6 (24) with screw (28),

flat washer (27), new lock washer (26), and nut (25).