MWO-9-2350-314-20-9
MODIFICATION OF HOWITZER, MEDIUM, SELF-PROPELLED: 155MM, M109A6
MODIFICATION WORK ORDER
OCTOBER 1997
MWO-9-2350-314-20-9 - Page 6 of 10
MWO 9-2350-314-20-9
11.
CALIBRATION REQUIREMENTS.
Not applicable.
12.
WEIGHT AND BALANCE DATA.
Weight and balance are not significantly affected.
13.
QUALITY ASSURANCE REQUIREMENTS.
WARNING
Hydraulic fluid under pressure can penetrate the skin or damage eyes. Fluid
leaks under pressure may not be visible. Use a piece of cardboard or wood to
find leaks. Do not use your hand. Wear safety goggles for protection. If fluid
enters your skin or eye, get immediate medical attention.
a. Inspect for leaking hydraulic fluid between the top of the pulse accumulator, the
elbow, and the hose. Any leaks are cause for rejection.
b. Inspect the installation for conformance to the MWO.
4.
RECORDING AND REPORTING OF THE MODIFICATION.
a. Records and Reports.
(1) Record the modification on DA Form 2408-5, Equipment Modification
Record, IAW DA Pamphlet 738-750, The Army Maintenance Management System (TAMMS).
(2) Complete DA Form 2407, Maintenance Request, IAW DA Pamphlet 738-750,
TAMMS. Forward the NMP copy to: Director, Armament and Chemical Acquisition and Logistics
Activity, ATTN: AMSTA-AC-NMR, Rock Island, IL 61299-7630. Forward the organizational copy
as directed by the local commander.
b. Marking Equipment. Not applicable.
c. Identification Data. Not applicable,
15.
MATERIEL CHANGE (MC) NUMBER.
This MWO is authorized by MC Number 1-81-05-
1002.
16.
MODIFICATION IDENTIFICATION.
This modification has been performed if mounting
plate, PN 12979847, is installed in the hydraulic compartment.
6
Back to Top
