SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 222 of 671

11-71.6. GUNNER’S PLATFORM ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two locknuts (11), washers (9), reinforcement brackets (10), capscrews (8), and washers (9)

from front gunner’s platform bracket (7) and cargo floor (5). Discard locknuts (11).

2.

Remove three locknuts (6), washers (3), capscrews (2), washers (3), gunner’s platform assembly (1),

and rear gunner’s bracket (4) from cargo floor (5). Discard locknuts (6).

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Five locknuts (Appendix G, Item 133.9)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-387-24P

b. Installation

1.

Install gunner’s platform assembly (1) and rear gunner’s platform bracket (4) on cargo floor with

three washers (3), capscrews (2), washers (3), and locknuts (6).

2.

Install front bracket (7) on cargo floor (5) with two washers (9), capscrews (8), reinforcement

brackets (10), washers (9), and locknuts (11). Tighten capscrews (2) and (8) to 21 lb-ft (29 N

•

m).

SMI 9-2320-387-14&P-1

11-132.14

Change 4