SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 238 of 671

12-57. ARCTIC CURTAIN ANGLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Peel curtain (2) back from fastener tape (1) on angle assembly (4).

2.

Remove three locknuts (8), washers (9), capscrews (5), washers (6), and angle assembly (4) from

cargo floor (7). Discard locknuts (8).

3.

Peel fastener tape (1) from angle assembly (4).

4.

Clean remaining adhesive from angle assembly (4) surface.

INITIAL SETUP:

Applicable Models

M1152

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Adhesive-sealant (Appendix C, Item 10)

Three locknuts (Appendix G, Item 101.8)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-387-24P

b. Installation

SMI 9-2320-387-14&P-1

12-92

Change 4

NOTE

Ensure surface is free of dirt and oil before applying adhesive

backing.

1.

Peel paper backing (3) from fastener tape (1) and install fastener tape (1) to angle assembly (4).

2.

Install angle assembly (4) on cargo floor (7) with three washers (6), capscrews (5), washers (9), and

locknuts (8). Tighten locknuts (8) to 17 lb-ft (23 N

•

m).

3.

Attach curtain (2) to fastener tape (1) on angle assembly (4).