SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 240 of 671

12-59. ARCTIC CURTAIN CHANNEL ASSEMBLY REPLACEMENT (2-MAN CREW)

This task covers:

a. Removal

b. Installation

a. Removal

1.

Peel curtain (13) back from fastener tape (7) on channel assembly (8).

2.

Open two straps (1) from curtain (13) and channel assembly (8).

3.

Remove four capscrews (4), washers (5), and channel assembly (8) from cargo floor (12).

4.

Peel and remove fastener tape (7) from channel assembly (8).

5.

Remove seal (9) from channel assembly (8).

6.

Remove four nuts (11), washers (10), screws (3), and two footman loops (2) from channel

assembly (8).

INITIAL SETUP:

Applicable Models

M1152

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-24P

b. Installation

SMI 9-2320-387-14&P-1

12-94/(12-95 blank)

Change 4

NOTE

Ensure surface is free of dirt and oil before applying adhesive

backing.

1.

Install two footman loops (2) on channel assembly (8) with four screws (3), washers (10), and

nuts (11).

2.

Install seal (9) into channel assembly (8).

3.

Peel paper backing (6) from fastener tape (7) and install fastener tape (7) on channel assembly (8).

4.

Install channel assembly (8) on cargo floor (12) with four washers (5) and capscrews (4).

5.

Install curtain (13) on channel assembly (8) with two straps (1).

6.

Secure curtain (13) to channel assembly (8) with fastener tape (7).