SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 250 of 671
SMI 9-2320-387-14&P-1
12-102
Change 4
12-65. REAR BUMPER REPLACEMENT (L119)
This task covers:
a. Removal
b. Installation
a. Removal
Remove four locknuts (6), washers (5), capscrews (3), washers (2), and bumper (4) from two inner
mounting brackets (1). Discard locknuts (6).
INITIAL SETUP:
Applicable Models
M1152
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four locknuts (Appendix G, Item 85)
Equipment Condition
• Towing pintle removed (para. 9-9).
• Rear tiedown brackets (L119) removed
(para. 24-12).
b. Installation
Install bumper (4) on two inner mounting brackets (1) with four washers (2), capscrews (3),
washers (5), and locknuts (6). Tighten locknuts (6) to 90 lb-ft (122 N•m).
FOLLOW-ON TASKS: • Install rear tiedown brackets (L119) (para. 24-12).
• Install towing pintle (para. 9-9).
Back to Top
