SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 27 of 671
SMI 9-2320-387-14&P-1
Change 4
2-3
KEY
ITEM AND FUNCTION
1
Rotary switch
has ENG STOP, RUN, and START positions. When positioned
to RUN, glow plugs are activated to heat engine precombustion chambers.
When positioned to START, starter will engage and crank engine.
2
Wait-to-start lamp assembly
illuminates when glow plugs are activated; goes
out when engine is ready to be started.
3
Brake warning lamp assembly
illuminates if parking brake is applied or if a
hydraulic imbalance (leak, etc.) exists between the front and rear brake
systems.
4
Air restriction gauge
signals the operator that a restriction exists in the air
cleaner.
5
Engine oil pressure gauge
indicates oil pressure when engine is running.
6
High beam lamp assembly
illuminates when front headlights are switched to
HIGH beam position.
7
Coolant temperature gauge
indicates engine coolant temperature.
8
Defroster control knob
directs heated air to windshield on the M1113, M1151,
and M1152. For the M1114, control knob directs outside air in for circulation.
9
Instrument panel lights
illuminate instrument panel gauges.
10
Heater control knob
controls the temperature of the air output.
11
Heater fan switch
controls blower motor fan speed. The switch has HI (high),
OFF, and LO (low) settings to regulate defroster and heater air flow into
vehicle.
12
Voltmeter
indicates the charging level and activity of the battery charging
system.
13
Speedometer/odometer
indicates vehicle speed and accumulated mileage.
14
Fuel gauge
indicates amount of fuel in fuel tank.
Back to Top
