SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 94 of 671
SMI 9-2320-387-14&P-1
10-48.2
Change 4
10-26.1. WINDSHIELD BALLISTIC GLASS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Sealing compound (Appendix C, Item 68)
Manual References
TM 9-2320-387-24P
Personnel Required
One mechanic
One assistant
Equipment Condition
Windshield wiper blade and arm removed
(para. 10-62).
General Safety Instructions
Eyeshields and gloves are required when
installing and removing windshield glass.
WARNING
Use eyeshields and gloves when removing and installing
windshield glass. Glass could shatter causing injury.
1.
Remove six screws (6) and upper retainer (5) from windshield frame (4).
2.
Remove four screws (1) and center retainer (2) from windshield frame (4).
3.
Remove ballistic glass (3) from windshield frame (4).
4.
Clean sealing compound from windshield frame (4).
1.
Apply a 1/8 in. (3 mm) bead of sealing compound around windshield frame (4).
2.
Position ballistic glass (3) to windshield frame (4) with marking on weatherstrip facing inward.
3.
Install center retainer (2) on windshield frame (4) with four screws (1).
4.
Install upper retainer (5) on windshield frame (4) with six screws (6).
b. Installation
a. Removal
Back to Top
