SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 92 of 671
10-20.1. FIXED REAR DOOR ACCESS PANEL REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove ten rivets (2), hinge (6), and door (8) from body (5).
2.
Remove ten rivets (1) and hinge (6) from door (8).
3.
Remove four rivets (11) and two rubber latches (10) from door (8).
4.
Remove four rivets (9) and two brushguards (12) from door (8).
5.
Remove four rivets (3) and two catches (4) from body (5).
6.
Remove seal (7) from door (8). Discard seal (7) if damaged.
NOTE
• For instructions on replacement of rivets, refer to para. 10-56.
• Replacement procedures for left and right exterior stowage doors
are basically the same. This procedure covers the left stowage door.
INITIAL SETUP:
Applicable Models
M1152
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Adhesive (Appendix C, Item 3)
Fourteen blind rivets (Appendix G, Item 262)
Twelve blind rivets (Appendix G, Item 265)
Manual References
TM 9-2320-387-24P
b. Installation
1.
Apply adhesive to seal (7) and install seal (7) on door (8).
2.
Install two catches (4) on body (5) with four rivets (3).
3.
Install two brushguards (12) on door (8) with four rivets (9).
4.
Install two rubber latches (10) on door (8) with four rivets (11).
5.
Install hinge (6) on door (8) with seven rivets (1).
6.
Install hinge (6) and door (8) on body (5) with seven rivets (2).
SMI 9-2320-387-14&P-1
10-32.2/(10-33 blank)
Change 4
Back to Top
