TB-9-2300-378-14
M48 & M60 SERIES VEHICLES
TECHNICAL BULLETIN; AIR INDUCTION SYSTEM MAINTENANCE
SEPTEMBER 1985
TB-9-2300-378-14 - Page 100 of 296
TB 9-2300-378-14
(q)
(r)
(s)
(t)
(u)
(v)
(w)
(x)
Install three plates 8705499 and three locknuts MS51988-7 securing front
stowage box to outrigger number 2 (view L).
Install four flat washers MS27183-17 and locknuts MS51988-7 securing front
stowage box to tank.
Install three plates 8705499, two new bolts MS35764-1291 and new locknut
MS51988-7 securing front stowage box to outrigger number 3 and outer
support bracket. Torque the two bolts to 25 lb-ft (34 N·m) lubricated.
Position rear fender stowage box between outrigger numbers 4 and 5.
Install three plates 8705499, new locknut MS51988-7 and two new bolts
MS35764-1291 securing rear stowage box to outrigger number 4 and outer
support bracket (view M).
Install three flat washers
stowage box to tank.
Install three flat washers
Torque two bolts to 25 1b-ft (34 N·m) lubricated.
MS27183-17 and locknuts MS51988-7 securing rear
MS27183-17 and locknuts MS51988-17 securing rear
stowage box to outrigger number 5.
Install 6 screws MS90726-60, 12 flat washers MS27183-14, 6 lockwashers
MS35338-46 and 6 nuts MS51967-8 securing rear stowage box to fender
reinforcing angle.
4-40
Back to Top
