TB-9-2300-378-14
M48 & M60 SERIES VEHICLES
TECHNICAL BULLETIN; AIR INDUCTION SYSTEM MAINTENANCE
SEPTEMBER 1985
TB-9-2300-378-14 - Page 95 of 296
TB 9-2300-378-14
(4)
Install Outriggers No. 3 and No. 4
(a)
(b)
(c)
(d)
(e)
NOTE
Check all new outriggers from kit to ensure the holes
for air cleaner mounting bolts are drilled to 21/32 inch
(.656 inch) in places indicated for each outrigger as
shown on figure 4-22.
If the holes are to be 21/32 inch
are 3/8 inch are 3/8 inch tapped holes, enlarge the
three holes on each outrigger to 21/32 inch.
Perform steps 1 through 5 to both left and right sides of
vehicle.
Using four new screws MS90725-183 and new lockwashers MS35338-51, install
new outrigger 12290526-1 (lt) or 12290526-2 (rt) to number 3 outrigger inner
support bracket (fig. 4-23, view A).
Torque four screws to 130 lb-ft (172
N·m) lubricated. Secure new outrigger to inner support bracket at top with
new screw MS90725-112 and new nut MS51922-33.
Install outer support bracket 11655113-1 (lt) or 8762504 (lt) or 11655113-2 (lt)
or 8762503 (rt) to number 3 outrigger using two new bolts MS35764-1289.
Torque to 25 lb-ft (34 N·m) lubricated.
Install new bolt MS35764-1291 and
new flat washer MS27183-17 attaching outer support bracket to base of
outrigger number 3. Torque bolt to 25 lb-ft (34 N·m) lubricated.
Using four new screws MS90725-183 and new lockwashers MS35338-51, install
new outrigger 12290527-1 (lt) or 12290527-2 (rt) to number 4 outrigger inner
support bracket (view B).
Torque four screws to 130 lb-ft (172 N·m)
lubricated. Secure new outrigger to inner support bracket at top with two
new screws MS90725-112 and new nuts MS51922-33 (fig, view B).
Install outer support bracket 8762503 (lt) or 8762504 (rt) to number 4
outrigger using two new bolts MS35764-1289. Torque bolts to 25 lb-ft (34
N·m) lubricated.
Install new bolt MS35764-1291 and new flat washer MS27183-17 attaching
outer support bracket to base of outrigger number 4. Torque bolt to 25 lb-ft
(34 N·m) lubricated.
4-35
Back to Top
