TB-9-2300-378-14
M48 & M60 SERIES VEHICLES
TECHNICAL BULLETIN; AIR INDUCTION SYSTEM MAINTENANCE
SEPTEMBER 1985
TB-9-2300-378-14 - Page 86 of 296
TB 9-2300-378-14
4-10. Aluminum Side or Top Loading Air Cleaner Replacement
a.
General.
When an aluminum air cleaner becomes unserviceable, it should be replaced with the
armored air cleaner. Currently, the M60 series tanks may be furnished with one of the
following listed air cleaners:
Aluminum Side Loading Air Cleaners (ALSLAC)
P/N 10863539- (Left) earlier model
P/N 10863540- (Right) earlier model
P/N 10940233-1, NSN 2940-00-067-7922- (Left)
P/N 10940233-2, NSN 2940-00-067-7926- (Right)
Aluminum Top Loading Air Cleaner (ALTLAC)
P/N 11655320-1, NSN 2940-00-621-1427- (Left)
P/N 11655320-2, NSN 2940-00-621-1428- (Right)
P/N 11675951-1, NSN 2940-00-455-2427- (Left)
P/N 11675951-2, NSN 2940-00-455-2511- (Right)
Only DS/GS personnel
cleaner replacement.
b. Parts Required.
When the aluminum side or
NOTE
are authorized to accomplish the air
top loading air cleaners are being replaced with the
armored top loading air cleaners, hardware kits 12290568 and 12290570 are required.
The armored air cleaner assembly is not part of these kits and must be requisitioned
separately.
When replacing aluminum side loading air cleaners with armored top
loading air cleaners, the existing fender extensions are not used and must be replaced
with new fender extensions. These fender extensions are not part of the armored air
cleaner kits and must be requisitioned separately. Fender extensions required are:
Left Fender Extension - NSN 2510-00-455-1351, P/N 11659711-1
Right Fender Extension - NSN 2510-00-455-1352, P/N 11659711-2
c.
Tools Required.
3/8-16 UNC-2B Tap
Sander Disk
Torch Outfit
Welder, Arc
Drill 5/16
d.
Procedures.
Replace aluminum air cleaner as follows:
(1) Remove aluminum air cleaner (TM20-1)
4-26
Back to Top
