TB-9-2300-378-14
M48 & M60 SERIES VEHICLES
TECHNICAL BULLETIN; AIR INDUCTION SYSTEM MAINTENANCE
SEPTEMBER 1985
TB-9-2300-378-14 - Page 44 of 296
TB 9-2300-378-14
(2) Top Loading Filter Element (Fig. 3-3).
(a)
(b)
(c)
(d)
(e)
(f)
(g)
Check filter element seal for permanent indentation, excessive hardness,
cracks, damage, or missing.
Check filter element frame and both locking pins and springs (if equipped) for
damage or missing parts.
Place light inside of filter element and check for ruptured material. Inspect
from outside.
If inspection reveals any defects, replace filter element.
If filter is contaminated with dust, clean with compressed air or by washing
(paragraph 3-4b).
If filter is contaminated with carbon, or oil deposits, replace filter element.
If filter element in the right air cleaner is contaminated with fuel:
(1)
Replace filter element.
(2)
Check for proper installation of fuel tank vent valve (paragraph 3-5).
Figure 3-3. Top loading filter element inspection.
3-24
Back to Top
