TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TB-9-2320-279-13-1 - Page 219 of 524

TB 9-2320-279-13-1

0020-1

0020

AC ALTERNATOR AND PULLEY REPLACEMENT

DRAFT

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

REMOVAL

NOTE

Tag and mark wires prior to removal to ensure proper installation.

1. Remove nut (1), lockwasher (2), and two wires (3 and 4) from terminal (5).

2. Remove nut (6), lockwasher (7), and wire (8) from terminal (9).

3. Remove nut (10), lockwasher (11), and two wires (12 and 13) from terminal (14).

THIS WORK PACKAGE (WP) COVERS:

Removal

Installation

Follow-On Maintenance

INITIAL SETUP:

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HEMAC001

Maintenance Level

Field Level Maintenance

Equipment Condition

Batteries disconnected (TM 9-2320-279-20).

Left splash guard removed (TM 9-2320-279-20).

AC alternator drive belts removed (WP 0019).

Tools and Special Tools

Shop Equipment, Common No. 1 (Item 4,

Appendix F)

Shop Equipment, Common No. 2 (Item 5,

Appendix F)

Tool Kit, General Mechanic’s (Item 7, Appendix F)

Materials/Parts

Sealant, RTV200 Electrical (Item 6, Appendix E)

Tags, Identification (Item 9, Appendix E)

Personnel Required

MOS 52C, Utilities equipment repairer (2)

References

TM 9-2320-279-20