TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TB-9-2320-279-13-1 - Page 222 of 524

TB 9-2320-279-13-1

0020-4

AC ALTERNATOR AND PULLEY REPLACEMENT - Continued

DRAFT

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6. Install two wires (12 and 13) on terminal (14) with lockwasher (11) and nut (10).

7. Install wire (8) on terminal (9) with lockwasher (7) and nut (6).

8. Install two wires (3 and 4) on terminal (5) with lockwasher (2) and nut (1).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

9. Apply electrical sealant to wires and mounting hardware on three terminals (5, 9, and 14).

FOLLOW-ON MAINTENANCE

1. Install AC alternator drive belts (WP 0019).

2. Install left splash guard (TM 9-2320-279-20).

3. Connect batteries (TM 9-2320-279-20).

END OF WORK PACKAGE

HEMAC001