TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TB-9-2320-279-13-1 - Page 233 of 524

TB 9-2320-279-13-1

0023-3

AC COMPRESSOR REPLACEMENT - Continued

DRAFT

NOTE

Note position of washer prior to removal to ensure proper installation.

4. Remove locknut (8), washer (9), and screw (10) from compressor (5) and mounting bracket (11).

5. Remove locknut (12), screw (13), and compressor (5) from mounting bracket (11).

INSTALLATION

1. Install compressor (5) on mounting bracket (11) with screw (13) and locknut (12).

Do not tighten

locknut (12).

CAUTION

A washer may need to be installed as a shim between outside of mounting bracket

flange and inside of compressor flange.

Failure to comply may result in

compressor flange breaking off if there is space between mounting bracket flange

and compressor flange when locknut is tightened.

NOTE

Install washer as noted prior to removal.

2. Install compressor (5) on mounting bracket (11) with screw (10), washer (9), and locknut (8).

Do not

tighten locknut (8).

HEMAC007