TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TB-9-2320-279-13-1 - Page 308 of 524

TB 9-2320-279-13-1

0038-10

AC HEATER/EVAPORATOR REPLACEMENT - Continued

DRAFT

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7. Install center cover (39) on console (37) with four screws (38).

8. Install two console covers (35 and 36) on console (37) with 11 screws (34).

CAUTION

•

Do not puncture temperature probe.

Failure to comply will cause gas in tube to leak

out.

•

Install temperature probe slowly into heater/evaporator.

Failure to comply may

result in damage to temperature probe.

NOTE

Temperature control switch temperature probe is installed correctly when it is inserted into

the AC evaporator core until it touches the bottom of the insertion hole.

9. Install temperature probe (33) into heater/evaporator (23).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HEMAC033