TB 9-2320-279-13-1
0012-2
AC HEATER/EVAPORATOR BLOWER OPERATES BUT NO COLD AIR FROM
DUCTS DURING AC OPERATIONS - Continued
DRAFT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
KNOWN INFO
Power to fan control switch OK.
Blower operates.
POSSIBLE PROBLEMS
AC condenser core blocked or damaged.
AC compressor belts loose or damaged.
AC heater/evaporator core blocked or
damaged.
AC temperature control switch temperature
probe damaged or installed incorrectly.
Heater cable faulty.
AC cable faulty.
Defrost cable faulty.
AC compressor clutch faulty.
AC harness wire 1154 faulty.
High pressure switch faulty.
AC harness wire 1156 faulty.
AC harness wire 1158 faulty.
Low pressure switch faulty.
AC condenser motor solenoid faulty.
AC condenser motor power wire faulty.
AC condenser motor ground wire faulty.
AC condenser motor faulty.
AC condenser assembly harness black wire
faulty.
AC harness wire 1155 faulty.
AC condenser assembly harness green wire
faulty.
AC condenser motor solenoid ground wire
faulty.
Fan control switch faulty.
Wire 1156 faulty.
AC temperature control switch faulty.
1.
Is AC condenser core free
from damage and debris?
If AC condenser core
is damaged, recover
R-134a refrigerant
(WP 0050).
Replace
AC condenser core
(WP 0024) and AC
condenser dryer
(WP 0025).
Evacuate and charge
system (WP 0050).
Verify repair, go to
Step 27 of this fault.
If AC condenser core
is blocked with
debris, remove
blockage.
Verify
repair, go to Step 27
of this fault.
NO
YES
START
Read WARNING on
page 0012-3.
WARNING
TEST OPTIONS
Visual inspection.
REASON FOR QUESTION
If AC condenser core is
damaged or blocked, AC
system will not operate
properly.