TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005
TB-9-2320-279-13-P-2

  TB-9-2320-279-13-P-2 - Page 15 of 460

TB 9-2320-279-13&P-2
v
HOW TO USE THIS TECHNICAL BULLETIN
NOTE
If at any time you are unsure how to use this technical bulletin or you cannot locate the information you need,
notify your supervisor.
INTRODUCTION
1.
This technical bulletin is designed to help you operate and maintain the HEMTT Crew Protection Kit. It also provides
installation instructions for the armor kit and includes the Repair Parts and Special Tools List (RPSTL).
2.
This technical bulletin is written in work package format:
a.
Chapters divide the technical bulletin into major categories of information (e.g.,
General Information, Equipment
Description and Data, and Theory of Operation
;
Operator Instructions
;
Operator Maintenance Instructions
;
Unit
Maintenance Instructions
; and
Supporting Information
).
b.
Each Chapter is divided into work packages, which are identified by a 6-digit number (e.g. 0001 00, 0002 00, etc.)
located on the upper right-hand corner of each page. The work package page number (e.g. 0001 00-1, 0001 00-2,
etc.) is located centered at the bottom of each page.
c.
If a Change Package is issued to this technical bulletin, added work packages use the 5
th
and 6
th
digits of their
number to indicate new material. For instance, work packages inserted between WP 0001 00 and WP 0002 00 are
numbered WP 0001 01, WP 0001 02, etc.
3.
Read through this technical bulletin to become familiar with its organization and contents before attempting to operate or
maintain the armor kit.
CONTENTS OF THIS TECHNICAL BULLETIN
1.
A
Warning Summary
is located at the beginning of this technical bulletin. Become familiar with these warnings before
operating or performing maintenance on the armor kit.
2.
A
Table of Contents
, located in the front of the technical bulletin, lists all chapters and work packages in the publication.
a.
The Table of Contents also provides
Reporting Errors and Recommending Improvements
information and DA
Form 2028 addresses, for the submittal of corrections to this technical bulletin.
b.
If you cannot find what you are looking for in the Table of Contents, refer to the alphabetical
Index
at the back of
the technical bulletin.
3.
Chapter 1,
General Information, Equipment Description, and Theory of Operation
, provides general information on the
technical bulletin and the armor kit.
4.
Chapter 2,
Operator Instructions
, explains and illustrates all operator procedures for the armor kit:
Operation Under
Usual Conditions
and
Operation Under Unusual Conditions
.
5.
Chapter 3,
Operator
Maintenance Instructions,
includes
Operator Preventive Maintenance Checks and Services (PMCS)
Introduction
and
Operator Preventive Maintenance Checks and Services (PMCS)
.
6.
Chapter 4,
Unit Maintenance Instructions
includes all unit maintenance tasks.
7.
Chapter 5,
Supporting Information,
includes
References
;
Maintenance Allocation Chart (MAC) Introduction
;
Maintenance Allocation Chart (MAC)
;
Expendable and Durable Items List
;
Torque Limits
;
Crew Protection Kit
Installation Instructions
;
Repair Parts and Special Tools List (RPSTL) Introduction
; and
Repair Parts and Special Tools
List (RPSTL)
.


Back to Top