TB-9-2320-279-13-P-2
TECHNICAL BULLETIN; CREW PROTECTION KIT
OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)
SEPTEMBER 2005
TB-9-2320-279-13-P-2 - Page 16 of 460
TB 9-2320-279-13&P-2
vi
FEATURES OF THIS TECHNICAL BULLETIN
1.
WARNINGs, CAUTIONs, NOTEs, subject headings, and other important information are highlighted in
BOLD
print as a
visual aid.
WARNING
A WARNING indicates a hazard which may cause injury or death to personnel.
CAUTION
A CAUTION is a reminder of safety practices or directs attention to usage practices that may cause damage to
equipment.
NOTE
A NOTE is a statement containing information that will make the procedures easier to perform.
2.
Statements and words of particular interest may be printed in CAPITAL LETTERS to create emphasis.
3.
Within a procedural step, reference may be made to another work package in this technical bulletin or to another manual.
These references indicate where you should look for more complete information.
a.
If you are told: “Refer to
Crew Protection Kit
Installation Instructions
(WP 0039 00),” go to WP 0039 00 in this
technical bulletin for instructions on this procedure.
b.
If you are told: “For complete information on HEMTT Operator PMCS, refer to TM 9-2320-279-10,” go to
References
in WP 0032 00 for complete information on the cited reference.
4.
Illustrations are placed after, and as close to, the procedural steps to which they apply. Callouts placed on the art are text or
numbers.
5.
Numbers located at lower right corner of art (e.g. 417-001, 417-002, 440-001, 440-002, etc.) are art control numbers and
are used for tracking purposes only.
6.
Technical instructions include metric units as well as standard units. For your reference, a
Metric Conversion Chart
is
located on the inside back cover of the technical bulletin.
Back to Top
