TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 299 of 460

II106700-5

Rev. B

Page 35

h)

Pre-fit the Windshield Frame Assembly on the vehicle, as shown in Figure 18.

Adjust the Side and Bottom Brackets as needed to line up the studs on the

Windshield Frame.

Use caution to avoid damage to the studs.

DO NOT hammer the

studs into position on the brackets.

Remove the Windshield Frame Assembly and

tighten the set screws in the Side and Bottom Windshield Brackets.