TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 304 of 460

II106700-5

Rev. B

Page 40

5.1.2

Install Side Armor Protection Kit (RH), P/N 106703-10

a.

Install the Door Hinge (P/N 113313-1) and the Hinge Bracket (P/N 113314-1) onto

the Front Cab Armor Panel (P/Ns 111432-1 and 111432-3 – the armor panel

consists of two overlapping plates, with the thicker plate on the outside) using

ten bolts (3/8 – 16 x 2.000 LG), ten washers (3/8 ID), and ten nuts (3/8 – 16)

(See Figure 23).

NOTE

The Door Hinge knuckle must be at the top when the Front Cab Armor Panel is

attached to the Bracket (See Figure 24).