TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 312 of 460

II106700-5

Rev. B

Page 48

f.

Install the top Louvered Grille Panel (P/N 111457-1) into the top slots of the Louvered

Grille Brackets.

g.

Secure the Louvered Grille Panels to the Louvered Grille Brackets by installing

five bolts (3/8 – 16 x 1.500 LG), ten flat washers (3/8 ID), and five locknuts (3/8 – 16)

through the ends of the passenger-side Louvered Grille Panels.

Tighten the locknuts

to 35 ft-lb.

5.1.6

Install the Rear Cab Armor Panels – Kit P/N 106702-3

NOTE

See Figure 29a and Paragraph “p” prior to installation.

a.

Remove the nut from the Harness Bracket (See Figure 29) and move the spacer to

the rear of the Bracket to clear the mounting of the Rear Cab Armor Panel Bracket.

b.

Replace the nut and secure the Harness Bracket.