TB-9-2320-279-13-P-3

TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT

OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)

JANUARY 2007

TB-9-2320-279-13-P-3 - Page 118 of 396

TB 9-2320-279-13&P-3

0026-2

0026

REMOVAL

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use

assistance during procedure. Ensure that any lifting device used is in good condition and of

suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to

follow this warning may cause injury or death to personnel.

NOTE

NOTE

• Both left wheel well assembly and right wheel well assembly are removed the same way.

Left wheel well shown.

• Wheel well assembly weighs 80 lb (36 kg).

1. Remove three screws (1), lockwashers (2), and one inner wheel house assembly (3) from wheel well

assembly (4). Discard lockwashers.

2. Remove three screws (5), lockwashers (6), washers (7), and locknuts (8) from wheel well assembly (4)

and front panel assembly (9). Discard lockwashers and locknuts.