TB-9-2320-279-13-P-3

TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT

OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)

JANUARY 2007

TB-9-2320-279-13-P-3 - Page 132 of 396

TB 9-2320-279-13&P-3

0029-2

0029

REMOVAL

NOTE

NOTE

• Both left side high mount stop light and right side high mount stop light are removed the

same way. Right side high mount stop light shown.

• Remove cable ties as required.

1. Disconnect stop lamp harness connector (1) from stop lamp extension harness (2).

2. Remove two screws (3), lockwashers (4), loop straps (5), and one stop lamp extension harness (2) from

rear door assembly (6). Discard lockwashers.

3. Remove two screws (7), lockwashers (8), and one high mount stop light (9) from rear door assembly (6).

Discard lockwashers.

4. Disconnect stop lamp extension harness connector (10) from high mount stop light (9).

5. Remove stop lamp extension harness (2) through front side of rear door assembly (6) and lamp

housing (11).

END OF TASK