TB-9-2320-279-13-P-3

TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT

OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)

JANUARY 2007

  TB-9-2320-279-13-P-3 - Page 133 of 396

TB 9-2320-279-13&P-3
0029-3
0029
INSTALLATION
NOTE
NOTE
• Both left side high mount stop light and right side high mount stop light are installed the
same way. Right side high mount stop light shown.
• Install cable ties as required.
1. Install stop lamp extension harness connector (10) through lamp housing (11) and front side of rear door
assembly (6).
2. Plug stop lamp extension harness connector (10) onto high mount stop light (9).
3. Install high mount stop light (9) into rear door assembly (6) with two lockwashers (8) and screws (7).
4. Tighten two screws (7) to 59 lb-in. (7 N•m).
5. Install two loop straps (5) around stop lamp extension harness (2) and secure to rear door assembly (6)
with two lockwashers (4) and screws (3).
6. Tighten two screws (3) to 41 lb-in. (5 N•m).
7. Connect stop lamp extension harness (2) to stop lamp harness connector (1).
END OF TASK


Back to Top