TB-9-2320-279-13-P-3

TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT

OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)

JANUARY 2007

TB-9-2320-279-13-P-3 - Page 155 of 396

TB 9-2320-279-13&P-3

0031-17

0031

INSTALLATION - MODEL A (OLDER VEHICLES)

1. Locate four wire connectors (28) on replacement wire harness (26). Cut black wire (7) and white wire with

brown tape (6). Discard four wire connector (28) and remaining short end of replacement harness.

NOTE

NOTE

• Install harness as noted prior to removal.

• Install cable ties as required.

2. Install compression nut (9) and plastic washer (11) on cable (10).

3. Install terminals (29) on black wire (7) and white wire with brown tape (6).