TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 254 of 396
TB 9-2320-279-13&P
0040
0040-4
MATERIALS/PARTS (Cont’d):
NSN (PART NUMBER)
NOMENCLATURE
QTY
(6433300-02M1) Green 383 or
(6433300-200M1) Tan 686A
Cover, Shackle Opening - Top
1
(6433315)
Kit, TAM Installation Hardware
1
Consisting of:
(4397064-007)
Nut, Hex Lock, .438-14
22
(4397064-005)
Nut, Hex Lock, .375-16
7
(4397012-074)
Screw, Pan Hd, #10-24 X .750
4
(4397012-076)
Screw, Pan Hd, #10-24 X 1.00
28
(4397005-017)
Washer, Flat, .438 USS
22
(4397005-016)
Washer, Flat, .438 SAE
38
(4397005-015)
Washer, Flat, .375 USS
8
(4397004-009)
Washer, Lock, .438
68
(4397004-008)
Washer, Lock, .375
22
(4397004-007)
Washer, Lock, .313
8
(4397004-005)
Washer, Lock, .190
32
(4397000-382)
Screw, Cap Hex Hd, .437-14 X 1.50
42
(4397000-381)
Screw, Cap Hex Hd, .437-14 X 1.25
18
(4397000-380)
Screw, Cap Hex Hd, .437-14 X 1.00
6
(4397000-072)
Screw, Cap Hex Hd, .375-16 X 3.50
1
(4397000-041)
Screw, Cap Hex Hd, .313-18 X 2.25
6
(4397000-068)
Screw, Cap Hex Hd, .375-16 X 2.50
6
(4397000-060)
Screw, Cap Hex Hd, .375-16 X 1.00
22
(4397000-036)
Screw, Cap Hex Hd, .312-18 X 1.25
2
(4397005-013)
Washer, Flat, .313 USS
6
PROCEDURES:
A. Prepare vehicle as follows:
NOTE
The following vehicle preconditions shall be met before installation
of armor kit (Refer to Appendix A):
•
If vehicle is so equipped, remove high mount stop lamp assemblies
and retain lamps for installation.
•
Remove pump module top and rear doors.
•
Remove left and right side access panels.
•
Remove ladder rail and ladder.
•
Remove 2500 gallon fuel tank.
•
Remove BII box.
•
Remove sling point cover.
1. Remove capscrew (2) and locknut (3) from pump module rear center support brace (1) as
shown in figure 1.
Discard capscrew (2) and locknut (3).
Back to Top
