TB-9-2320-279-13-P-3

TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT

OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)

JANUARY 2007

TB-9-2320-279-13-P-3 - Page 325 of 396

TB 9-2320-279-13&P

0040

0040-75

Fuel Tank Removal

Cut plastic ties as required.

Some vehicles have a screw, lockwasher, washer, lockwasher, lockwasher and nut.

Others have a

flanged screw and flanged nut.

Remove screw (1), locknut (6), and ground wire (6.1) from cushion clip (7).

Remove cushion clip.

Disconnect fuel supply line (8) from check valve (9).

Disconnect fuel return line (10) from elbow (11).

Drain fuel from lines (8 and 10) into suitable container.

There are two types of air vents.

Model A is 12 in. (304.8 mm) long while Model B is a 24 in. (609.6 mm)

long.

Both are removed the same way.

Remove air vent line (12).

Remove drain plug (13), and drain fuel into container.