TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008
TB-9-2320-279-13-P-4

  TB-9-2320-279-13-P-4 - Page 199 of 744

HEAV
Y
-DUT
Y
WINCH
REMOTE CONTROL
UNIT
HIGH IDLE
ON
/
OFF SWITCH
REMOTE CONTROL
CABLE CONNECTOR
D
E
C
B
A
Figure 6.
4. Connect negative (-) probe of multimeter to wire 1854 at remote control cable connector, terminal C.
5. Multimeter should display a reading less than 200 ohms. Note reading.
CONDITION/INDICATION
Is continuity measured between heavy-duty winch remote control unit wires 1849 and 1854 at remote control
cable connector, terminals D and C when the HIGH IDLE ON/OFF switch is in the ON position?
DECISION
No - Test 8 - Is continuity measured on heavy-duty winch remote control unit harness wires 1849, 1854, and
1854B?
Yes - Test 7 - Can heavy-duty winch control valve harness wire 1849 be repaired?
TB 9-2320-279-13&P-4
0024
0024-7


Back to Top