TB-9-2320-279-13-P-4
TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET
TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL
APRIL 2008
TB-9-2320-279-13-P-4 - Page 207 of 744
AB
K
JTLMC
SV
HR O PD
E
F
G
UN
CONNECTOR
LOCATOR
CHASSIS HARNESS
CONNECTOR
CAB HARNESS
CONNECTOR
TERMINAL D
Figure 12.
6. Connect negative (-) probe of multimeter to a known good ground.
7. Multimeter should display a reading between 22 and 28 vdc. Note reading.
8. Set PTO ENGAGE switch to OFF position. (WP 0015)
9. Shut OFF engine (refer to TM 9-2320-279-10).
CONDITION/INDICATION
Are 22 to 28 vdc measured on wire 1843 at cab harness connector MC1, terminal D?
DECISION
No - Test 13 - Can cab harness wire 1843 be repaired?
Yes - Test 14 - Can chassis harness wire 1843 be repaired?
TB 9-2320-279-13&P-4
0024
0024-15
Back to Top
