TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008

TB-9-2320-279-13-P-4 - Page 433 of 744

FIELD MAINTENANCE

WINCH CONTROL VALVE WIRE HARNESS REMOVAL/INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's: Automotive (WP

0081, Table 2, Item 5)

Materials/Parts

Cable Ties, Plastic (WP 0083, Table 1, Item 1)

Sealant, RTV200 Electrical (WP 0083, Table 1,

Item 29)

Tags, Identification (WP 0083, Table 1, Item 30)

Locknut (WP 0084, Table 1, Item 10) Qty: 4

Lockwasher (WP 0084, Table 1, Item 12) Qty: 1

References

Parts Manual (Fig. 1)

Equipment Condition

Batteries disconnected (refer to TM

9-2320-315-14&P).

REMOVAL

NOTE

•

Tag and mark wires and connectors prior to removal to ensure proper installation.

•

Note position and remove cushion clips and cable ties as required.

1. Disconnect connector SV10 (1) from reel in coil (2).

TB 9-2320-279-13&P-4

0049

0049-1