TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008

TB-9-2320-279-13-P-4 - Page 439 of 744

7

11

6

9

8

10

5

7

FRONT VIEW

REAR VIEW

Figure 9.

NOTE

To simplify wire installation, you may wish to remove high idle switch from mounting bracket

before installing wires. Re-install high idle switch after installing wires.

7. Install wire 1516 (9) on high idle switch (7) with screw (8).

8. Install wire 1843 (6) on high idle switch (7) with screw (5).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated

area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately

with soap and water. Failure to comply may result in injury or death to personnel.

9. Apply sealant on wire 1516 (9), screw (8), wire 1843 (6), and screw (5).

TB 9-2320-279-13&P-4

0049

0049-7