TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008

TB-9-2320-279-13-P-4 - Page 559 of 744

FIELD MAINTENANCE

HEAVY-DUTY WINCH CONTROL VALVE REMOVAL/INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Cap and Plug Set (WP 0081, Table 2, Item 1)

Pan, Drain, 4 Gallon (WP 0081, Table 2, Item 3)

Tool Kit, General Mechanic's: Automotive (WP

0081, Table 2, Item 5)

Wrench, Adjustable, 18 inch (WP 0081, Table 2,

Item 6)

Socket, 1 1/2 inch, 1/2 inch Drive (WP 0081, Table

2, Item 6)

Goggles, Industrial (WP 0081, Table 2, Item 7)

Materials/Parts

Cable Ties, Plastic (WP 0083, Table 1, Item 1)

Oil, Lubricating (WP 0083, Table 1, Item 25, 26, 27,

28)

Tags, Identification (WP 0083, Table 1, Item 30)

Packing, Preformed (WP 0084, Table 1, Item 28)

Qty: 2

Packing, Preformed (WP 0084, Table 1, Item 26)

Qty: 3

Locknut (WP 0084, Table 1, Item 3) Qty: 4

Packing, Preformed (WP 0084, Table 1, Item 24)

Qty: 3

Locknut (WP 0084, Table 1, Item 7) Qty: 3

Packing, Preformed (WP 0084, Table 1, Item 27)

Qty: 1

References

Parts Manual (Fig. 27)

Parts Manual (Fig. 1)

Equipment Condition

Batteries disconnected (TM 9-2320-315-14&P).

REMOVAL

NOTE

•

Tag and mark connectors prior to removal to ensure proper installation.

•

Remove cable ties as required.

1. Disconnect connector SV10 (1) from reel in coil (2).

TB 9-2320-279-13&P-4

0072

0072-1