TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008

TB-9-2320-279-13-P-4 - Page 575 of 744

FIELD MAINTENANCE

EQUALIZER BEAM ASSEMBLY (REAR TANDEM) REMOVAL/REPAIR/INSTALLATION

INITIAL SETUP:

Not Applicable

NOTE

For removal/repair/installation of the equalizer beam assembly, refer to “Equalizer Beam

Assembly (Rear Tandem) Removal/Repair/Installation” in TM 9-2320-315-14&P. Substitute

the following Step for Step (6) in the “Installation” section.

1. Lubricate threads of two screws (7) with oil and install four washers (8), two beam end adapters (6), screws,

and nuts (9) in each equalizer beam (1). Tighten nuts to 445 to 495 lb-ft (603 to 671 N·m).

END OF TASK

END OF WORK PACKAGE

TB 9-2320-279-13&P-4

0073

0073-1/(2 blank)