TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008

TB-9-2320-279-13-P-4 - Page 579 of 744

3

1

ROTATION

DIRECTION

4

2

Figure 2.

CAUTION

Do not allow cable end to extend past edge of winch drum. Failure to comply may result in

damage to equipment.

NOTE

As one screw is tightened, the other will loosen slightly until clamp block is seated around

cable.

2. Place clamp block (2) over cable (4) and install two screws (1). Tighten screws alternately until both are tight.

NOTE

If new cable was installed, proceed to Step (3) and New cable Break-In section, otherwise

proceed to Follow-On Maintenance.

3. Break-in new cable.

END OF TASK

TB 9-2320-279-13&P-4

0074

0074-3