TB-9-2320-280-35-13
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-13 - Page 56 of 148
5-28
TB 9-2320-280-35-13
NOTE
Ensure convoluted tubing is cut straight and even to allow proper
fit of locking collar.
12-13
. Install locking collar (26) on one end of convoluted tubing (27)
12-14.
Place convoluted tubing (27) in hole (28) in right wheelhouse (1), through wheelhouse (1) and
through hole (4) in right wheelhouse (1). Mark convoluted tubing at proper length.
12-15.
Remove convoluted tubing (27) from wheelhouse (1) and cut to proper length.
NOTE
Ensure convoluted tubing is cut straight and even to allow proper
fit of locking collar.
12-16.
Install locking collar (26) on other end of convoluted tubing (27).
12-17.
Place convoluted tubing (27) in hole (4) in top of right wheelhouse (1), through wheelhouse (1) and
through hole in rear wall (28). Secure with nylon nuts (29).
27
28
1
~
Figure 5-43.
Figure 5-42.
27
26
26. LOCKING COLLAR – Z52-0013-002 – QTY. 2
27. CONVOLUTED TUBING – Z52-0013-001 – QTY. 1
29
29
1
28
4
27
~
29. NYLON NUT – 10075-1397 – QTY. 2
Back to Top
