TB-9-2320-280-35-14

TECHNICAL BULLETIN

INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F

SEPTEMBER 2006

  TB-9-2320-280-35-14 - Page 131 of 148

5-109
TB 9-2320-280-35-14
Section XXXVIII.
ANTENNA CABLE INSTALLATION
NOTE
Perform following steps for vehicles with bolt-on armor and
antenna installed on right side of windshield frame.
38-1.
Route antenna cable (1) through hole (5) and connect antenna cable (1) to antenna (2).
38-2.
Remove self-tapping screw (4) from right capping ring (3).
38-3.
Secure antenna cable (1) to right capping ring (3) with clamp (6) and existing self-tapping screw (4).
3
4
2
6
5
1
Figure 5-135.
1. ANTENNA CABLE – A32551281W23 – QTY. 1
6. CLAMP – MS21333-96 – QTY. 1


Back to Top