TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 152 of 380

TB 9-2320-302-13&P-1

COWL ARMOR REPLACEMENT - CONTINUED

0028 00

0028 00-2

REMOVAL

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

NOTE

Cowl armor weighs 71 lb (32 kg).

1.

With assistance, remove four bolts (1), washers (2),

and cowl assembly (6) from vehicle.

2.

Remove four bolts (4), washers (5), two bolts (7),

washers (8), and right and left cowl corners welding

(3) from cowl armor (6).

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

INSTALLATION

1.

Install right and left cowl corner weldings (3), two washers (8), bolts (7), four washers (5), and bolts (4) on cowl armor

(6).

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

NOTE

Cowl armor weighs 71 lb (32 kg).

2.

With assistance, install cowl armor assembly (6), four washers (2), and bolts (1) on vehicle.

3.

Install front armor (WP 0029 00).

4.

Install windshield ballistic glass (WP 0025 00).

END OF WORK PACKAGE

417-184

6

7

3

4,5

2

1

8