TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 272 of 380

Installation Manual – P/N 0257550622-00

(Doc No.:

II

113500-1 D)

Freightliner M915 / M916 -

Crew Protection Kit

Page 80 of 125

5.17.2

Installation Instructions

1.

Set panel #805 in place over the floor armor panel on the passenger’s side as shown in

Figure 5-89.

Align the holes though #805 with the OEM seat mounting nut plates in the

cab floor.

2.

Set Panel #816 in place over the floor armor panel on the driver’s side as shown in

Figure 5-89.

Align the holes though #816 with the OEM seat mounting nut plates in the

cab floor.

3.

Set the driver’s seat in position as shown if Figure 5-89.

Install the indicated bolts and

washers.

Re-attach the restraint system to the seat as required.

Repeat for the

passenger’s seat.