TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 15 of 396
TB 9-2320-302-13&P-2
v/vi Blank
Change 1
FEATURES OF THIS BULLETIN
1.
WARNINGs, CAUTIONs, NOTEs, subject headings, and other important information are highlighted in
BOLD
print as
a visual aid.
WARNING
A WARNING indicates a hazard which may cause injury or death to personnel.
CAUTION
A CAUTION is a reminder of safety practices or directs attention to usage practices that may cause damage
to equipment.
NOTE
A NOTE is a statement containing information that will make the procedures easier to perform.
2.
Statements and words of particular interest may be printed in CAPITAL LETTERS to create emphasis.
3.
Within a procedural step, reference may be made to another work package in this bulletin or to another bulletin. These
references indicate where you should look for more complete information.
a.
If you are told: “Refer to
Crew Protection Kit Installation Instructions
(WP 0038 00)”, go to WP 0038 00 in this
bulletin for instructions on this procedure.
b.
If you are
told: “For complete
information on M915A3 Operator PMCS, refer to
TM
9-2320-302-10, go
to
References
in WP 0033 00 for complete information on the cited reference.
4.
Illustrations are placed after, and as close to, the procedural steps to which they apply. Callouts placed on the art are text
or numbers.
5.
Numbers located at lower right corner of art (e.g., 440-001; 440-002) are art control numbers and are used for tracking
purposes only.
6.
Technical instructions include metric units as well as standard units. For your reference, a
Metric Conversion Chart
is
located on the inside back cover of the bulletin.
Back to Top
