TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 26 of 396
TB 9-2320-302-13&P-2
THEORY OF OPERATION - CONTINUED
0003 00
0003 00-2
GENERAL - CONTINUED
The M915A2, M915A3, and M915A4 with an armor kit installed has an upgraded suspension. The following tables list
the parts replaced with the upgrade. Use original Technical Manuals when servicing the suspension on these vehicles. Refer to
Table 1 for M915A2 part information, refer to Table 2 for M915A3 part information, and refer to Table 3 for M915A4 part
information.
Table 1. M915A2 Front Suspension Kit (Part Number: 57K4954)
TM Reference - TM 9-2320-363-20.
QTY
PART NUMBER
NSN
PART DESCRIPTION
2
A16-11814-001
14,000 lb Flat Leaf Suspension Spring, 4
in.
4
11-09624-095
U Bolt-Suspension, 7/8-14 x 9.5 in. long
8
16-09040-002
Wear Plate-Spring Pin, Shackle
2
16-11905-xxx
Spacer, Axle Stop to Spring, 1.25 x 4.0
x 6.0 in.
6
16-12373-000
Pin-Spring
8
23-00461-007
Nut-Hex, 7/8-14 in.
24
23-09114-003
Washer-Hardened, 1/2 in. nominal ID
8
23-09114-005
Washer-Hardened, 7/8 in. nominal ID
8
23-09114-009
Washer-Hardened,1 1/8 in. nominal ID,
1.25 in.
8
23-09440-250
Screw-Cap, Hex, 1/2-13 x 2.5 in. long,
Grade 8
8
23-09440-325
Screw-Cap, Hex, 1/2-13 x 3.25 in. long,
Grade 8
16
23-09860-012
Washer-Flat, 1.25 x 1.88 x 0.031 in.
8
23-13175-108
Nut-Hex, 1/2-13 in.
6
23-13275-000
Fitting, Lubrication, 90 degree Elbow
2
16-13363-011
Shim-Axle, 3.0 degree, 4.0 in.
2
23-09271-138
Pin-Dowel, .75 in. OD x 1.38 in. long
1
1-4854
Data Plate
1
M915A2
14K Suspension Installation Instructions
Back to Top
