TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 263 of 396

ArmorWorks

1.) Loosen and remove 1/4-20 bolts from

window frame

* Note: 001 is driver side and 002 is

passenger side

2.) Insert driver and passenger side

frames with 1/4-20X1 bolt, flat washer

and lock washer on outer holes and

center holes require 1/4-20 X 1 3/4

bolts (center holes will need to be

drilled).

3.) Insert frame holder (driver and passenger).

4.) Insert glass in frame holder.

5.) Bolt outside frame to glass.

6.) Tighten washers and blots ONLY on

the bottom three bolts leave the top

three for later installation.

TB 9-2320-302-13&P-2

0038 00-51