TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 281 of 396
ArmorWorks
1.) Drill a 1/2 inch hole with Drill and Drill Bit. Drilling should occur 3 and 1/4 inches from the
mid body seam and 9 and 1/2 inches from front cowl. Ensure that when drilling that both
panels, inner and outer, are drilled through.
2.) Release connectors with flathead screwdriver.
3.) Guide Wires through hole drilled in step one.
0038 00-69
Back to Top
