TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 12 of 680
TB 9-2320-335-13&P
1-2
MEASUREMENT
ABBREVIATION
Ampere .
........................
A
Celsius.
.........................
C
Centimeter.
......................
cm
Fahrenheit.
......................
F
Gallon .
.........................
gal.
Gallons Per Minute.
................
gpm
Horsepower .
.....................
hp
Inch.
...........................
in
.
Kilogram .
.......................
kg
Kilometers Per Hour.
...............
kph
Kilometers Per Liter.
...............
km/L
KiloPascal .
......................
kPa
KiloWatt.
........................
kW
Liters.
..........................
L
MEASUREMENT
ABBREVIATION
Liters Per Minute.
.................
L
/m
Maximum.
.......................
max
Miles Per Gallon.
..................
mpg
Miles Per Hour.
...................
mph
Millimeter .
......................
mm
Minimum.
.......................
m
in
Newton-Meter
.....................
N
•
m
Pint.
...........................
pt
Pound.
..........................
lb
Pound-Feet.
......................
lb-ft
Pounds Per Square Inch.
............
ps
i
Quart.
..........................
qt
Revolutions Per Minute.
.............
rpm
Vo
lt .
...........................
V
STANDARD
METRIC
1. CAPACITIES
Brake Master Cylinder
(Serial Numbers 3000000 and Above).
.................
2.36 pt
1.12 L
2. COOLING SYSTEM
Fan: (Serial Numbers 300000 and Above)
Type .
......................................
Nine Blade
Diameter.
...................................
23
in
.
58.0 cm
3. TRANSFER CASE
(Serial Numbers 300000 and Above)
Manufacturer.
..................................
Magna Powertrain
Model.
.......................................
MP2226
Gear Ratios:
High and High Lock.
...........................
1.0:1
Low Lock.
...................................
2.72:1
4. SERVICE BRAKE CALIPER (FRONT AND REAR)
(Serial Numbers 300000 and Above)
Manufacturer.
..................................
Wilwood
Piston Diameter.
................................
1.870 in.
47.5 mm
5. SERVICE/PARKING BRAKE ROTOR (FRONT AND REAR)
(Serial Numbers 300000 and Above)
Manufacturer.
..................................
Wilwood
Diameter.
.....................................
12.08 in.
307 mm
Thickness .
....................................
0.945 in.
24 mm
Vehicle performance data for the REV vehicles is listed in table 1-2. Information not covered can be found
in TM-9-2320-387-24-1.
Table 1-1. Tabulated Data.
NOTE
Standard and metric measurements will be used in this table.
A list of their abbreviations is provided below.
TABULATED DATA ABBREVIATIONS
1-2. TABULATED DATA
Back to Top
