TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 21 of 680
TB 9-2320-335-13&P
1-11/(1-12 blank)
A
STEERING WHEEL
– Serves as manual steering control for the operator.
1-27.1. STEERING CONTROL SYSTEM OPERATION (SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)
B
STEERING COLUMN
– Transmits turning effort from steering wheel to intermediate steering
shaft.
C
INTERMEDIATE STEERING SHAFT
– Permits angle of torque from steering column to input
shaft of power steering gear.
D
STEERING GEAR
– Converts hydraulic power from steering pump to mechanical power at pitman
arm.
E
PITMAN ARM
– Transfers steering torque from power steering gear to center link.
TIE ROD ASSEMBLY
– Transmits movement from center link to geared hub.
G
GEARED HUB
– Serves as the pivot point and link for the front wheels via the tie rod assembly.
CENTER LINK
– Transmits movement from pitman arm to tie rods.
I
IDLER ARM
– Supports right side of center link.
H
F
Back to Top
