TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 28 of 680
TB 9-2320-335-13&P
2-6
ITEM
NO.
INTERVAL
ITEM TO BE
INSPECTED
PROCEDURES
NOT FULLY MISSION
CAPABLE IF:
3
Semi-
annually
Geared Fan
Drive (Serial
Numbers
300000 and
Above)
WARNING
If vehicle has been operating, use
extreme care to avoid being burned
when removing geared fan drive fill
plug. Use rags or heavy gloves to protect
hands.
a.
Ensure fluid is even with bottom of
fill plug hole.
NOTE
• The coupler shaft has a CV joint at the
geared fan drive end and one at the
engine crankshaft end.
• Each CV joint has two grease fittings.
Only one fitting needs to be lubricated.
Second fitting is used to give an
optional location depending on the
position of the shaft when engine is
stopped.
b.
Lubricate coupler shaft CV joints.
Table 2-1. Unit Level Preventive Maintenance Checks and Services HMMWV (Cont’d).
GREASE
FITTINGS
GREASE
FITTINGS
RESERVOIR
FILL PLUG
Back to Top
