TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 378 of 680
TB 9-2320-335-13&P
21-20
21-4.4. REAR DIFFERENTIAL COVER MAINTENANCE
(SERIAL NUMBERS 300000 AND ABOVE)
This task covers:
a. Removal
c. Installation
b. Cleaning and Inspection
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
RTV silicone compound (Appendix C, Item 74)
Drycleaning solvent (Appendix C, Item 26)
Equipment Condition
Rear differential removed (para. 21-4.2).
Manual References
TM 9-2320-387-24P
General Safety Instructions
Drycleaning solvent is flammable and will not be
used near an open flame.
Maintenance Level
Direct support
Remove twelve capscrews (4) and cover (3) from differential (1).
NOTE
Drycleaning solvent is flammable and will not be used near an
open flame. A fire extinguisher will be kept nearby when the
solvent is used. Use only in well-ventilated places. Failure to do
this may result in injury to personnel or damage to equipment.
1.
Using drycleaning solvent, clean cover (3), twelve capscrews (4), and face of differential (2).
2.
Inspect cover (3) and internal cooler for cracks, wear, or breaks. Replace cover (3) if cracked, worn, or
broken.
1.
Apply RTV silicone compound to face of differential (2)
2.
Install cover (3) on differential (1) with twelve capscrews (4).
c. Installation
b. Cleaning and Inspection
a. Removal
Back to Top
