TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 491 of 680
D-3
TB 9-2320-335-13&P
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)
MATERIAL BLOCK
STOCK SIZE
DESCRIPTION
SPECIFICATION
0.125 X 2.570 X 3.500 in.
ALUMINUM FLAT SHEET
IAW ASTM B 209
(3.175 X 65.278 X 88.900 mm)
0.125 X 0.750 X 24.000 in.
ALUMINUM RECTANGLE
IAW ASTM B 211
(3.175 X 19.050 X 609.600 mm)
Figure D-107. Pulley Alignment Tool Fabrication.
INSTRUCTIONS:
NOTE
• Remove all burrs and sharp edges from aluminum sheet
and rectangle.
• Pulley alignment tool can be assembled using nuts, bolts,
rivets, or by welding.
1.
Cut aluminum sheet (1) to size as shown.
2.
Position aluminum rectangle (2) on top of aluminum sheet (1) as shown in figure D-107.
NOTE
Check all measurements before welding, riveting, or bolting
pulley alignment tool together.
3.
Assemble pulley alignment tool as shown in figure D-107.
Back to Top
