TB-9-2320-387-35-4
SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
TECHNICAL BULLETIN; INSTALLATION INSTRUCTIONS
OCTOBER 2006
TB-9-2320-387-35-4 - Page 48 of 109
5-32
TB 9-2320-387-35-4
Figure 5-42.
3. ANTENNA MOUNTING BRACKET – A3014546-1 – QTY. 1
Section XI.
REAR SINCGARS ANTENNA INSTALLATION
NOTE
This procedure applies to vehicles without existing antennas. For
vehicles with existing antennas, remove all control cables. (Refer
to TM 9-2320-387-24.)
11-1.
Using antenna mounting bracket (3) as template, locate, mark, and drill one 1.375-in. diameter
hole (4) in left rear wall (2).
11-2.
Locate, mark, and drill three 0.343-in. diameter holes (1) in rear wall (2).
11-3.
Remove paint from vicinity of three holes (1) and three matching holes in antenna mounting
bracket (3).
11-4.
Apply anti-seize compound to vicinity of three holes (1) and rear of antenna mounting bracket (3).
1
2
1
4
3
Back to Top
